# \[Abandoned\] deCONZ **URL:** \ **Category:** Apps\ **Tags:** app, zigbee, devices\ **Created:** [May 5, 2020, 9:57am UTC](https://community.homey.app/t/abandoned-deconz/29390 "2020-05-05T09:57:44Z")\ **Posts on this page:** 20\ **Page:** 48
**Author:** ![JeeHaa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeehaa/32/29849_2.png) [@JeeHaa](https://community.homey.app/u/JeeHaa)\ **Post date:** [March 19, 2023, 2:06pm UTC](https://community.homey.app/t/abandoned-deconz/29390/955 "2023-03-19T14:06:15Z")
My zigbee network on HP23 has been pretty stable in the last week, comparable with Deconz I would say. I do have plenty of routers though (Linkind bulbs, Tuya plugs and only Aqara sensors). I still suspect I have wifi interference in the morning with some of the motion sensors (delay or missed motion alert), because I had this with Deconz as well before I changed the channel. Will change channel once it’s supported on HP23, it’s an occasional issue and only in specific places. @wesley_w I would definitely give HP23 native Zigbee another try. Maybe try to add some supported cheap plugs add as router here and there? BTW: I don’t think devices dropping from the network should be caused by interference. No experience with switching many bulbs at once, I only have a set of 2 in the kitchen and that works without any noticable delay. ---
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [March 19, 2023, 4:05pm UTC](https://community.homey.app/t/abandoned-deconz/29390/956 "2023-03-19T16:05:40Z")
Yes my zigbee network is stable at the moment. 4 routers and 17 end devices. So at the moment I’m quiet happy with the zigbee performance of hp2023 ---
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [March 21, 2023, 3:24pm UTC](https://community.homey.app/t/abandoned-deconz/29390/957 "2023-03-21T15:24:56Z")
Yes - After a few days I have to inform everyone that my Zigbee Network directly to HP2023 is extremally stable and fast. I ditched some IKEA tradfri repeaters that where used in de deconz setup. I use some INNR and TUYA plugs as routers. I cannot see the node connection at the moment in the developer webpage but my ques is that all is routing properly. ![2023-03-21 16_20_46-Homey Developer Tools](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/0/40120992456fad5f6e0df7ecc758cda5fda22587.png) EDIT: Suddenly without any notice my zigbee network got unresponsive again. ---
**Author:** ![Seinuh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/seinuh/32/16357_2.png) [@Seinuh](https://community.homey.app/u/Seinuh)\ **Post date:** [March 21, 2023, 4:28pm UTC](https://community.homey.app/t/abandoned-deconz/29390/958 "2023-03-21T16:28:59Z")
I also turned off deconz last weekend with no problems ---
**Author:** ![Wout-1976](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout-1976/32/175413_2.png) [@Wout-1976](https://community.homey.app/u/Wout-1976)\ **Post date:** [March 22, 2023, 10:02am UTC](https://community.homey.app/t/abandoned-deconz/29390/959 "2023-03-22T10:02:49Z")
How do you guys run Deconz (Conbee II) on your Homey Pro 2023? VM, Docker Raspberry etc ? ---
**Author:** ![Seinuh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/seinuh/32/16357_2.png) [@Seinuh](https://community.homey.app/u/Seinuh)\ **Post date:** [March 22, 2023, 7:35pm UTC](https://community.homey.app/t/abandoned-deconz/29390/960 "2023-03-22T19:35:38Z")
I now run everything directly via Homey 2023… ---
**Author:** ![Wout-1976](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout-1976/32/175413_2.png) [@Wout-1976](https://community.homey.app/u/Wout-1976)\ **Post date:** [March 22, 2023, 7:37pm UTC](https://community.homey.app/t/abandoned-deconz/29390/961 "2023-03-22T19:37:47Z")
But is there a sdk3 for Deconz? ---
**Author:** ![Seinuh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/seinuh/32/16357_2.png) [@Seinuh](https://community.homey.app/u/Seinuh)\ **Post date:** [March 22, 2023, 7:40pm UTC](https://community.homey.app/t/abandoned-deconz/29390/962 "2023-03-22T19:40:49Z")
no, that’s why everything transferred to homey itself and so far no problems ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [March 23, 2023, 5:13am UTC](https://community.homey.app/t/abandoned-deconz/29390/963 "2023-03-23T05:13:45Z")
The Conbee is registered with Home Assistant. The devices are then transferred to Homey via the HA app. ---
**Author:** ![Sepp\_Malec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sepp_malec/32/13516_2.png) [@Sepp\_Malec](https://community.homey.app/u/Sepp_Malec)\ **Post date:** [April 11, 2023, 11:22am UTC](https://community.homey.app/t/abandoned-deconz/29390/964 "2023-04-11T11:22:18Z")
your lucky… after i added 90% of my zigbee devices to HP2023 zigbee became unresponsive, and i kept getting red led ring… so now im back to running deconz connected to my old HP ---
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [April 11, 2023, 12:29pm UTC](https://community.homey.app/t/abandoned-deconz/29390/965 "2023-04-11T12:29:51Z")
Since yesterday i got some Aqara PIR sensors and door/window sensors that are not responding or not always responding. So i see the same behavior with the zigbee as with my HP2016… I cannot transfer back to Deconz unfortunately because Deconz is not support on HP2023 ☹ ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [April 11, 2023, 1:22pm UTC](https://community.homey.app/t/abandoned-deconz/29390/966 "2023-04-11T13:22:00Z")
Of course, Conbee 2 is supported on the eraly 23, only the way is different: - Install Home Assistant on the Raspi - Connect the Conbee stick to the Raspi - Install the deConz HA add on - Install your devices - Install Homey HA Community App on Homey - Import the devices with the Homey HA App into Homey - thats it ![Screenshot_20230411-151815_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/6/96e41bae527d9429709f79b9d2e68a4438e47100.jpeg) > **[Home Assistant Community](https://homey.app/de-de/app/io.home-assistant.community/Home-Assistant-Community/)** > > Verbinde dich mit Home Assistant ![Screenshot_20230411-152909_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/5/85a40a94c62496c1ccff5aa1c3248e23240db3b9.jpeg) ---
**Author:** ![Sepp\_Malec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sepp_malec/32/13516_2.png) [@Sepp\_Malec](https://community.homey.app/u/Sepp_Malec)\ **Post date:** [April 11, 2023, 4:51pm UTC](https://community.homey.app/t/abandoned-deconz/29390/967 "2023-04-11T16:51:28Z")
only thing i cant seem to get into homey through HA is switches… ikea pucks, hue switches, all other devices goes right in… ---
**Author:** ![Birger\_Siemering](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/birger_siemering/32/13221_2.png) [@Birger\_Siemering](https://community.homey.app/u/Birger_Siemering)\ **Post date:** [April 14, 2023, 6:10am UTC](https://community.homey.app/t/abandoned-deconz/29390/968 "2023-04-14T06:10:08Z")
I have the Same Problem. I have many Switches in Deconz. ---
**Author:** ![timvdhoorn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/timvdhoorn/32/55746_2.png) [@timvdhoorn](https://community.homey.app/u/timvdhoorn)\ **Post date:** [April 14, 2023, 8:46am UTC](https://community.homey.app/t/abandoned-deconz/29390/969 "2023-04-14T08:46:23Z")
What type of switches are you talking about?; maybe I can help. I migrated to the HA community app recently and I was able to migrate every device. (tho I also reconfigured the devices for use with Zigbee2MQTT) ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [April 14, 2023, 4:30pm UTC](https://community.homey.app/t/abandoned-deconz/29390/970 "2023-04-14T16:30:01Z")
You have to differentiate between switches and buttons. A switch (on or off) can easily be added by the HA Community app as switch/plug device. For buttons (only press, no on/off) it depends on the HA integration. Some are providing sensors with a changing state on press. Others like Hue are only sending events. For events you have to use the app flow trigger using the event\_type, devide id and button id. ---
**Author:** ![Flemming\_Pedersen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/flemming_pedersen/32/43832_2.png) [@Flemming\_Pedersen](https://community.homey.app/u/Flemming_Pedersen)\ **Post date:** [April 22, 2023, 10:25am UTC](https://community.homey.app/t/abandoned-deconz/29390/971 "2023-04-22T10:25:44Z")
@RonnyW Are there any place I can read or see a video with a example of this, or in other words a noob explanation, that you know off? ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [April 22, 2023, 9:31pm UTC](https://community.homey.app/t/abandoned-deconz/29390/972 "2023-04-22T21:31:50Z")
@Flemming_Pedersen If you are talking about HA devices (Deconz imported to HA and then imported to Homey via Community app), you can: - check your HA entities and their domain (the prefix of the name like button. or sensor. - check the entity state or state changes in HA developer tools. Search for your entity and check if the starte is changing when pressing the button. - check the events in HA developer tools if events are raised when pressing a button. I can only show you the event version. But it’s also documented in then HA thread. > [@\[APP\]\[Pro\] Home Assistant - Community App](https://community.homey.app/t/app-pro-home-assistant-community-app/71477/178): > > New test version 1.0.3: New filter fields are added to the app flow trigger “Event has been triggered”. Use these fields to filter the eventy by up to three field from the data JSON object. Example: Hue event: Log the events with filter “hue\_event” to the HomeyLog. Copy the field names and values: [grafik] Then input the values into the flow card: [grafik] This way you can react with this card on a single events (and type) of a single device. This example reacts on the first click (in… Here is an example with a sensor representation. > [@\[APP\]\[Pro\] Home Assistant - Community App](https://community.homey.app/t/app-pro-home-assistant-community-app/71477/411): > > A sensor can have a state dependent on the HA implementation as string, number or boolean value. I think it’s a string/text value. The first flow card is used for additiona generic sensors (added in device settings). So use the “Value (text) has changed”. This shoudl trigger on the value change. Perhaps you have to add a logic card to check the value if it changes twice. You can log the value using the card tag into the timeline to see what content is sent. ---
**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\ **Post date:** [April 23, 2023, 3:18am UTC](https://community.homey.app/t/abandoned-deconz/29390/973 "2023-04-23T03:18:21Z")
I think that this topic is now complete, and it’s time to create a new topic which relates to the new method - rather then I being hidden in this thread. I’ll close this thread, please create a new thread for your questions. We do this so others can quickly find the answers as well. Thanks ---
**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\ **Post date:** [April 23, 2023, 3:18am UTC](https://community.homey.app/t/abandoned-deconz/29390/974 "2023-04-23T03:18:27Z")
Closed on April 23, 2023, 3:18am UTC [Previous page](https://community.homey.app/t/abandoned-deconz/29390.md?page=47)