# Aanwezigheid detectie met smart presence

**URL:** <https://community.homey.app/t/aanwezigheid-detectie-met-smart-presence/77649>\
**Category:** Vragen & hulp\
**Tags:** homey-pro\
**Created:** [March 13, 2023, 2:32pm UTC](https://community.homey.app/t/aanwezigheid-detectie-met-smart-presence/77649 "2023-03-13T14:32:34Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [March 14, 2023, 12:52pm UTC](https://community.homey.app/t/aanwezigheid-detectie-met-smart-presence/77649/10 "2023-03-14T12:52:20Z")

</div>

In principe moet Homey werken als je separate 2.4GHz en 5GHz wifi netwerken instelt.  
Je schijnt enkel geen aparte SSID in te kunnen stellen op de M5.  
Om Homey toch te kunnen pairen, kun je Homey tijdelijk aan een verlengsnoer hangen, en met je telefoon in de hand weglopen van je router.  
Zodra je telefoon geen verbinding meer heeft met je 5GHz wifi, moet je Homey kunnen koppelen met je wifi (hij/zij heeft dan geen last meer van je 5GHz netwerk)

> **[Does Deco support separate 2.4GHz and 5GHz SSIDs? - Home Network Community](https://community.tp-link.com/en/home/forum/topic/541930)**
>
> Deco supports disabling 2.4GHz and 5GHz separately under the Main/Guest/IOT networks. As for separate SSIDs over 2.4GHz and 5GHz, it might not be completed via a single network, But you could set the Main Network to 5GHz only, and then create a diffe

> [@Problems connecting your new Homey Pro to your WiFi? Try this!](https://community.homey.app/t/problems-connecting-your-new-homey-pro-to-your-wifi-try-this/10161):
>
> Make sure your WiFi is using the 2.4 GHz network. Make sure your WiFi uses the b / g standard, only n or ac does not work. Turn off your Homey. Restart your Router and any Access Points that distribute IP addresses. Start your Homey again. If the above do not work, turn off 5 GHz WiFi and support for n and ac in your Router / Access Point during Homey installation. Ensure that your SSID (the name of your WiFi) does not use characters other than numbers and letters - do not us…

---

_[View the full topic](https://community.homey.app/t/aanwezigheid-detectie-met-smart-presence/77649)._
